Used Forklift Parts - Inevitably, lift truck parts would eventually wear out and require replacing. The choice of purchasing new components can become costly so one more idea is to purchase used parts. This can save much cash in the end. It is a good idea to buy used lift truck components which have been reproduced. These components will ensure that you are getting components that will work for a long time and be productive.
Worn or broken parts which are reproduced are a less expensive answer compared to rebuilding. With rebuilding parts, just the components which are worn out or broken get changed, which means that other wearable components might break down soon after purchase.
Remanufacturing on the other hand offers the best guarantee for second-hand parts. Reproduced parts are taken apart and cleaned and then all wearable pieces are changed. All wearable components are replaced regardless of age or wear which is another rationale why reproduced components in general work so much better. Whatever part within the part is new and this provides much longer life to the second-hand part. Based on the lift truck parts that are being redone, the cleaning process and the complete remanufacturing process will differ.
After complete disassembly, the engines are oven cleaned. Different parts of the engine like for instance pistons, spark plugs, rings, valve springs, filters, and valves can be replaced during the remanufacture process. The engines are hot tested after reassembly to guarantee that there are no oil pressure problems, no leaks, noises or any vacuum.
Transmissions are one more item that is oven cleaned after being disassembled. The transmission is then pressure washed. A complete examination is performed so as to check for any cracks. Seals, bearings and bushings are all replaced. Normally, the replacement parts utilized on transmission components meet OEM specifications.
Certain lift truck parts like for example the water pump, torque converters, the alternator, the starter and steer axles could be quite serviceable after worn parts are replaced. The electronic control in the electric forklift is maintained by the control card. This card could also be reproduced with replacing all aged and worn out components. Not like other lift truck components the control card can only have the worn and aged parts replaced.
Parts which are reproduced have to be thoroughly checked upon reassembly to ensure they are in good condition previous to being sold. When purchasing these components, it is a good idea to be certain that they have undergone all of the proper testing and inspections. On certain bigger components such as steer axles, engines and transmissions, OEM specification replacement parts must be used.
The dealer of used forklifts and parts can guarantee that the reproduced components have met OEM specifications and that these parts meet industry standards. A lot of details go into remanufacturing second-hand parts. This attention to detail provides more serviceability out of reproduced parts than the components that were only rebuilt.
Click to Download the pdf